Find Bicycles Online

Replacement lower box link for the Intense 6.6 frame. Intense part number 130004.

Check Prices at Jenson USA

Roach Chainstay ProtectorProtects your frame from scratches and dents. Helps quiet that nasty chain slap. These do not stretch Nylon construction w/ foam padding on the underside of the top portion Velcro closure Regular – 3.2″ circumference(1″ dia) x 9.75″ long Supersize – 6.25″ circumference(2″ dia) x 9.75″ long

Check Prices at Jenson USA

Yeti ASR-7 Frame 2009The premise behind the AS-R 7′s development was to create a trail bike with even more travel and descending capabilities than the 575 platform, and still be a capable climber.  Well, you have exactly that in the AS-R 7: 7″ of rear-wheel travel in a 7.5 lb package.  The main pivot location and leverage ratio make the as-r 7 an efficient pedaling machine.  But when gravity takes over, that’s when things get fun.The fully custom hydroformed tubeset enabled Yeti to optimize the weight-to-stiffness ratio of the frame.  With this frame it is possible to build a 29 lb complete 7″ travel bike.  Pair that with a tapered headtube, 12mm custom rear thru axle, swingarm mounted front derailleur, ISCG mount, gravity dropper cable routing, and an ultra stiff carbon dogbone, and you have your do-it-all bike equipped for tackling the accents and ripping down the descents.  With the AS-R 7 you have all the tools to take on whatever the trail throws at you, and not think twice about it.Complete bike image for illustration purposes only…this is a frame not a complete bike.  Several component packages are available to complement this frame into a complete bike.  Please see our custom build kits or contact one of our knowledgeable customer service representatives for options. Features Fully custom hydroformed tubeset Carbon fiber dogbone 7″ rear wheel travel Fox RP23 or Fox DHX air custom tuned ISCG ’05 mount swingarm mounted front derailleur 12mm rear thru axle Gravity dropper cable routing Tapered headtube Published weight 7.5 lns Replaceable derailleur hanger Compatibility 30.9mm seatpost E-type front derailleur (attaches to swing arm w/ included mount) 135 x 12mm rear axle spacing 73mm bottom bracket 160 – 185mm rotor Tapered head tube 1.5″ to 1 1/8″ ISCG ’05 mounts Recommended fork travel – 160mmGeometry   Small  Medium   Large  Seat Tube 17.7″ 18.9″ 19.9″ Top Tube 22.6″ 23.6″ 24.6″ Head Angle 67 67 67 Seat Angle 66.8 66.8 66.8 Chain Stay 16.9″ 16.9″ 16.9″ Head Tube 4.5″ 4.5″ 5.1″ Standover 31.5″ 32.0″ 32.0″ All measurements are calculated using a 160mm from with a ride height of 545mm

Check Prices at Jenson USA